To effectively remove bond glue, start by softening the glue and then use appropriate solvents to dissolve and wipe it away.
Removing stubborn bond glue can be a challenge, but by using the right approach and materials, you can tackle it successfully. The key is often to weaken the adhesive's bond before attempting to physically remove it.
Steps for Removing Bond Glue
Here's a structured approach based on common methods:
1. Soften the Glue
Begin by trying to soften the bond glue. This initial step can make subsequent removal much easier.
- Household All-Purpose Cleaner: According to the reference, you should try softening the glue first with a household all-purpose cleaner. Apply the cleaner to the bonded area and let it sit for a few minutes as directed by the cleaner's instructions to allow it to penetrate and loosen the glue.
2. Dissolve the Glue with Solvents
If softening alone isn't enough, you'll need a solvent to help dissolve the glue. Choose a solvent appropriate for the surface you're working on, as some can damage certain materials.
- Alternatives to Acetone: For a tougher alternative to acetone, the reference suggests you experiment with denatured alcohol, lighter fluid, or hydrogen peroxide. These substances can help break down the adhesive properties of many types of bond glue.
3. Apply and Remove
Proper application of the solvent is crucial for dissolving the glue.
- Application: Apply with a rag or cotton ball, ensuring the material is saturated with the chosen solvent.
- Soaking: Hold the saturated rag or cotton ball to dissolve the glue. Allow it to sit on the bonded area for a period of time to give the solvent a chance to work. The exact time will depend on the type of glue and solvent used.
- Wipe Away: Once the glue appears dissolved or significantly softened, then wipe away. You may need to repeat this process or gently scrape with a non-damaging tool (like a plastic scraper) if residue remains.
Always test any cleaner or solvent on an inconspicuous area first to ensure it doesn't damage the surface you are cleaning. Ensure good ventilation when using solvents like denatured alcohol or lighter fluid.
