Using Color Design hair dye involves properly mixing the dye with a developer and applying it for a specific processing time. Here's a breakdown of the process:
Mixing the Dye
The key to successful Color Design hair dye application is achieving the correct ratio of dye to developer. There are two primary mixing ratios, depending on the desired opaqueness of the color:
- Opaque Results (Full Coverage): Mix 50cc of Color Design hair dye with 50cc of the appropriate developer. This is a 1:1 ratio.
- Translucent Results (Sheer Color): Mix 50cc of Color Design hair dye with 75cc of the appropriate developer. This is a 1:1.5 ratio.
Application and Processing
After properly mixing the dye, the next step is to apply it evenly to your hair, following the instructions on the specific Color Design product you're using. Pay close attention to root application and ensuring all strands are saturated.
- Processing Time: After applying the dye, allow it to process for 35-45 minutes. This allows the color to fully deposit into the hair shaft. Always check the specific instructions on your Color Design product, as processing times may vary slightly.
Important Considerations:
- Developer Choice: The "appropriate developer" is crucial. Different developers contain different strengths (volume of peroxide) which affect the lift and deposit of the color. Consult the Color Design product instructions or a professional stylist to determine the correct developer volume for your hair type and desired color. Using the wrong developer can damage your hair or result in an undesirable color.
- Strand Test: Before applying the dye to your entire head, perform a strand test. This involves applying the dye to a small, hidden section of your hair to see how the color develops and to check for any adverse reactions.
- Safety Precautions: Always wear gloves during the mixing and application process to protect your hands. Avoid contact with eyes. If contact occurs, rinse immediately with water.
In summary, properly mixing the color with the developer in the correct ratio (1:1 for opaque, 1:1.5 for translucent) and processing for 35-45 minutes will help you achieve the best results with Color Design hair dye.
