To install a spring clip using the method shown in the reference, you will need a nail and a hammer. The key is to insert the nail at a slight angle rather than straight in before hammering it home.
Steps for Installing a Spring Clip with a Nail
Based on the provided reference snippet, the process involves the following simple steps:
- Position the Nail: Start with your nail ready for insertion.
- Angle the Nail: Crucially, position the nail so it is slightly slanted. The reference specifically notes, "this is at a slight you can see that slightly slanted. It's not straight in okay". This angle is important for the installation.
- Hammer the Nail: Once the nail is positioned at the correct slight angle, "just go ahead and Hammer it. In."
This method is suitable for spring clips designed to be mounted using a nail, leveraging the slanted angle for proper seating or retention.
Reference Information Utilized:
- "My nail here."
- "And go ahead now this is at a slight you can see that slightly slanted. It's not straight in okay"
- "and then just go ahead and Hammer it. In."
