To use Bonide Ground Force Vegetation Killer, you'll typically mix it with water and apply it to unwanted vegetation to kill it. The correct mixing ratio and application methods are crucial for effectiveness.
Mixing Bonide Ground Force
- Mixing Ratio: A standard mixing rate is 1 quart of Bonide Ground Force Vegetation Killer to 1 gallon of water. This mixture is generally suitable for covering approximately 75 square feet.
- Containers: Use a clean sprayer or container specifically designated for herbicides. Never reuse containers for other purposes, especially food or water.
- Thorough Mixing: Ensure the mixture is thoroughly combined before application.
Application Methods
-
Preparation: Clear the area of any debris or objects that you don't want to be exposed to the herbicide.
-
Spraying:
- Use a garden sprayer to apply the mixture directly to the foliage of the weeds or unwanted vegetation.
- Ensure complete coverage of the plant, as the herbicide is absorbed through the leaves.
-
Application Timing:
- Apply on a calm day to prevent drift to desirable plants.
- Avoid application before rain, as it can wash away the herbicide and reduce its effectiveness.
- Ideal times are generally when weeds are actively growing.
Safety Precautions
- Personal Protective Equipment (PPE): Always wear gloves, eye protection, and long sleeves to avoid skin and eye contact.
- Avoid Drift: Be careful to avoid spraying desirable plants. Use a shield or nozzle that directs the spray precisely.
- Storage: Store the concentrate and mixed solution in a secure location, out of reach of children and pets.
- Disposal: Dispose of unused herbicide and empty containers according to local regulations. Never pour it down drains or into waterways.
Important Considerations
- Target Vegetation: Ground Force is a non-selective herbicide, meaning it will kill most types of vegetation it comes into contact with. Use caution around desirable plants.
- Coverage Area: The 75 square feet per gallon guideline is an estimate. Adjust the amount of solution you mix based on the size of the area you need to treat.
- Reapplication: Depending on the type of weeds and their maturity, you may need to reapply the herbicide to achieve complete control. Check the product label for specific instructions.
- Read the Label: Always read and follow the manufacturer's instructions on the product label for specific application rates, safety precautions, and other important information. This is crucial, as product formulations and recommendations can change.
By carefully mixing and applying Ground Force vegetation killer while prioritizing safety, you can effectively control unwanted vegetation.
