Installing rising hinges involves a precise process to ensure they function correctly. Here’s a step-by-step guide based on the provided reference:
Preparing the Door and Frame
Before you start fitting the hinge, a bit of preparation is needed.
- Mortise the Door:
- You need to create a mortice (a recess) on the door’s edge.
- This mortice should be the exact thickness of the hinge leaf.
- Make sure the mortice is smooth, with all shavings and swarf (metal filings) removed.
- Position the Hinge:
- Place the hinge leaf into the prepared mortice.
- Ensure the hinge is flush with the door edge and correctly aligned.
- Mark Fixing Holes:
- Using the hinge as a template, mark the positions for screw holes on the door.
- Pilot Drill:
- Before inserting screws, pilot drill the marked locations.
- Select a drill bit slightly smaller than the screws to be used.
Securing the Hinge to the Door
Once the preparation is done, fixing is straightforward:
- Secure with Screws:
- Using the screws provided with the hinges, secure the hinge leaf into the door's mortice.
- Make sure to fix each screw firmly but avoid overtightening.
- Repeat for All Hinges:
- Repeat the entire process for any additional rising hinges needed on the same door.
Aligning and Testing
- Check the Door Swing: After installing all hinges, gently swing the door to ensure smooth and proper operation. Rising hinges lift the door slightly as it opens, making sure there is clearance between the door and frame or floor.
- Make Adjustments: If the door is not moving freely or binding, you may need to make small adjustments to screw tightness or hinge positioning.
| Step | Action |
|---|---|
| 1. Mortising | Create a recess on door to equal the thickness of the hinge leaf |
| 2. Positioning | Place hinge leaf in mortice, mark fixing holes |
| 3. Pilot Drilling | Pilot drill the fixing holes |
| 4. Securing | Screw the hinge leaf to the door |
| 5. Repetition | Repeat the process for all other hinges on the door |
By following these steps you will correctly install rising hinges. These are often used in applications where the floor is uneven, or where the door requires extra clearance as it opens.
