Adjusting a fitted wardrobe door typically involves manipulating the screws on the door's hinges to correct alignment and ensure smooth operation.
Here's a breakdown of the process:
-
Identify the Problem: Determine specifically how the door is misaligned. Is it sagging, rubbing against the frame, or not closing properly? Observing the issue will help you target the correct adjustment points.
-
Locate the Hinge Adjustment Screws: Most fitted wardrobe hinges have at least two screws, sometimes three. These screws allow you to adjust the door in different directions. You'll typically find these at the top and bottom of each hinge.
-
Vertical Adjustment (Height): Look for screws that, when adjusted, allow you to move the door up or down. Often, loosening the top screw and tightening the bottom screw (or vice versa) on all hinges will raise or lower the door. Adjust these screws incrementally to alter the door's height. As the YouTube video mentioned, these screws are usually located at the top and bottom of each hinge.
-
Horizontal Adjustment (Lateral Movement): Other screws on the hinge typically allow for lateral movement (left or right). Adjusting these will help align the door with the frame and prevent rubbing.
-
Depth Adjustment (In/Out): Some hinges also offer depth adjustment. This type of adjustment allows you to move the door closer to or further away from the wardrobe frame. This is useful if the door is protruding too much or is set too far back.
-
Make Small Adjustments: It's crucial to make small adjustments and test the door after each adjustment. Over-adjusting can worsen the problem.
-
Tighten the Screws: Once you've achieved the desired alignment, ensure all screws are tightened securely.
-
Test and Refine: Open and close the door several times to ensure it moves smoothly and closes properly. Make any further adjustments as needed.
Example:
If the door is sagging on the hinge closest to the floor, you might try tightening the top screw and loosening the bottom screw on that particular hinge to lift that corner of the door. Remember to make small adjustments and check the door's alignment frequently.
