Applying insulating wallpaper, like Wallrock Thermal Liner, involves careful preparation and application to maximize its thermal benefits. Here's a step-by-step guide:
Steps for Applying Insulating Wallpaper
-
Mark Application Lines: Use a level and pencil to draw vertical lines on the wall. These lines will guide you in applying the insulating wallpaper straight. This ensures proper alignment and a professional finish.
-
Apply Adhesive Generously: Use a high-quality adhesive specifically designed for insulating wallpaper, such as Wallrock Thermal Liner Adhesive. Apply it liberally and evenly to the wall surface using a roller or brush. Make sure the entire area where the first strip of wallpaper will be placed is covered.
-
Attach the Wallpaper: Carefully position the insulating wallpaper (Wallrock Thermal Liner) onto the adhesive-covered wall. The "fluffy" or textured side should face down, against the wall. This side is designed for optimal insulation. Press firmly and smooth out any air bubbles.
-
Cut Excess Paper: Once the insulating wallpaper is securely in place, use sharp scissors or a utility knife to trim any excess material at the top and bottom of the wall. A sharp blade is crucial for a clean and professional-looking edge.
Additional Tips for Success
- Surface Preparation: Ensure the wall surface is clean, dry, and free from loose debris. Fill any holes or cracks and sand down any unevenness. Priming the wall can also improve adhesion.
- Adhesive Selection: Using the correct adhesive is paramount. Wallrock Thermal Liner Adhesive is specifically formulated for this type of wallpaper and provides the necessary bonding strength.
- Smoothing: Use a wallpaper smoother or a clean, soft cloth to press the wallpaper firmly against the wall, working from the center outwards to eliminate air pockets.
- Seams: Ensure seams are butted together tightly for a seamless finish. Avoid overlapping the edges.
- Drying Time: Allow sufficient drying time as recommended by the adhesive manufacturer before painting or applying a final wallpaper layer.
- Ventilation: Ensure good ventilation in the room during application and drying to facilitate the adhesive setting.
By following these steps and tips, you can successfully apply insulating wallpaper to improve the thermal performance of your walls.
