To put a window screen on, you generally need to open the window so the top and bottom sashes meet in the middle, then slide the screen up into the frame.
Here's a more detailed explanation:
-
Prepare the Window: Open your window. Most standard windows that utilize screens have top and bottom sashes. Position these so that they meet in the middle of the window frame. This creates space above where the screen will sit, allowing you to maneuver it.
-
Align the Screen: Hold the window screen with both hands, positioning it so that the bottom edge of the screen is slightly outside the bottom track (or opening) where it will eventually sit.
-
Slide the Screen Up: Carefully slide the screen upwards into the window frame. As you slide it up, angle the screen, so the top part of the screen clears the upper track.
-
Position the Screen: Once the top of the screen is above the top track, gently lower the screen into the track. The bottom of the screen should now align with the bottom track.
-
Secure the Screen: Ensure the screen sits snugly within the window frame's tracks. Some screens have spring-loaded plungers or clips that click into place to hold the screen securely. Check that these are engaged.
Important Considerations:
- Screen Orientation: Be sure the screen is facing the correct direction (usually, the side with the most visible mesh is facing outwards).
- Window Type: The specific steps might vary slightly depending on the type of window (e.g., single-hung, double-hung, sliding).
- Screen Size: Ensure the screen is the correct size for your window. An incorrectly sized screen will not fit properly and may fall out.
- Damage: Inspect the screen and frame for any damage before installation. A damaged screen might need repair or replacement.
