Installing a magnetic strip fly screen door curtain is a straightforward way to keep insects out while allowing fresh air in. The process typically involves preparing your door frame, preparing the screen itself, and then attaching the screen to the frame.
Here's a general guide on how to install your magnetic screen door:
Preparation is Key
Before you begin installation, gather your materials and prepare the door frame area.
- Clean the Door Frame: Wipe down the door frame where the screen will be attached. Use a damp cloth or an alcohol wipe to remove any dust, dirt, or grease. This ensures the adhesive on the hook and loop strips will stick properly.
- Measure: While most magnetic screens are adjustable or come in standard sizes, it's good practice to quickly measure your door opening to ensure the screen is the right fit.
Preparing the Magnetic Screen
This step involves getting the screen ready before attaching it to the door frame.
- Check the Magnets: Check each magnet to ensure they attract to each other symmetrically. This confirms the central opening will close properly after someone passes through.
- Attach Hook and Loop Strips to Screen: Peel the adhesive backing off the hook and loop strips. Apply these strips to the magic mesh screen according to the included diagram or instructions. Typically, the loop (softer) side of the strips adheres to the screen edges.
- Lay Flat: Lay the screen flat on the floor or a large surface to ensure the magnets align correctly and the screen is not twisted.
Attaching the Screen to the Door Frame
Now, you will attach the prepared screen to your cleaned door frame.
- Mark the Center: Find the center of your door frame's top edge and mark it lightly.
- Start at the Top: Locate the center point of the screen's top edge (usually marked or where the two panels meet). Align this with the center mark on your door frame.
- Peel Adhesive and Stick: Starting from the top center, peel the remaining adhesive backing from the hook (rougher) side of the hook and loop strips (which should now be attached to the screen) and press the screen firmly onto the door frame along the top.
- Work Down the Sides: Once the top is secured, work your way down both sides of the door frame, gently pulling the screen taut but not stretched, and pressing the hook and loop strips firmly against the frame. Ensure the screen hangs straight.
- Add Reinforcements (Optional): Many kits include push pins or tacks for extra security, especially at the top corners and along the sides. Use these if provided for a more durable installation.
Final Adjustments
- Check Closure: Walk through the screen several times to ensure the magnets close quickly and completely behind you.
- Adjust if Needed: If the screen drags on the floor or doesn't close correctly, you may need to reposition the top hook and loop strip slightly higher on the frame. If there are gaps on the sides, press the strips more firmly or add extra pins.
By following these steps, including checking magnet symmetry and applying adhesive hook and loop strips as indicated in the reference, you can effectively install your magnetic strip fly screen door curtain.
