Putting glue in a hot glue gun is a simple process involving inserting the glue stick and preparing the gun for heating.
To load a hot glue gun, you typically insert a suitable glue stick into the back opening of the tool.
Step-by-Step Guide to Loading Your Glue Gun
Loading your hot glue gun correctly ensures it functions properly and safely. Here are the basic steps:
- Select the Right Glue Stick: Ensure you have a glue stick that is the correct diameter for your specific hot glue gun model.
- Locate the Loading Port: The loading port for a hot glue stick is almost always found at the back of the glue gun.
- Insert the Glue Stick: As demonstrated in the reference, "You just pop this right in the back of the gum [gun]. And push it in." Gently guide the stick into the opening and push it forward until it stops. You may need to apply a little pressure to seat it properly.
- Prepare for Heating: After inserting the stick, "plug in the glue gun." Connect the power cord to a suitable electrical outlet.
- Allow Time to Heat: Leave the glue gun plugged in for a few minutes to allow the heating element to melt the glue stick. As mentioned in the reference, "it'll may take up to five minutes to warm up." The exact time depends on the gun's wattage and size.
Once heated, you can squeeze the trigger (if applicable) to push the melted glue out of the nozzle for your project. You will typically insert new glue sticks from the back as needed to continue gluing.
