Changing the ink cartridges on your HP Envy 5660 printer is a straightforward process that helps maintain print quality.
Here are the general steps to replace the ink cartridges:
Step-by-Step Guide to Replacing HP Envy 5660 Ink
Follow these steps to successfully change the ink in your printer:
- Power On: Ensure your HP Envy 5660 printer is turned on.
- Open Cartridge Access: Open the front door or lid that provides access to the ink cartridges. On many models, this causes the print carriage to move to the center.
- Wait for Carriage: Wait until the print carriage stops moving before proceeding.
- Remove Old Cartridge: Gently press down on the old cartridge to release it, then pull it straight out to remove it from its slot.
- Prepare New Cartridge: Take the new replacement cartridge out of its packaging. Be careful to only touch the black plastic part. Locate the protective tape, usually bright orange or pink, and carefully peel it off. Do not touch the ink nozzles or copper contacts.
- Insert New Cartridge: Hold the new cartridge by its sides with the contacts facing towards the printer. Align the ink cartridge so it will fit into the slot. Push the cartridge firmly into its corresponding slot until it clicks into place.
- Pro Tip from the reference: If the cartridge is not fitting easily, check to make sure you have it the right way up and that you were inserting it into the correct slot.
- Close Access Door: Close the front access door or lid securely.
- Printer Initialization: The printer will usually perform a short initialization or alignment process after the cartridges are installed. Follow any on-screen prompts if they appear.
Important Considerations
- Cartridge Types: The HP Envy 5660 typically uses HP 62 ink cartridges (Black and Tri-color). Ensure you purchase the correct type. XL cartridges are available for higher yield.
- Correct Slot: Black cartridges usually go in the right slot, and tri-color in the left slot, but always double-check the labels inside the printer.
- Easy Fit: Cartridges should slide in relatively easily when correctly aligned and oriented. Do not force them.
Following these steps will allow you to replace the ink cartridges and get back to printing quickly.
