Changing the ink in your HP Envy printer is a simple process that involves removing the old cartridge and installing a new one. Following a few steps ensures the process is smooth and your printer recognizes the new ink correctly.
Step-by-Step Guide to Changing HP Envy Ink Cartridges
Replacing your ink cartridges is crucial for maintaining print quality. Here's a detailed guide to help you through the process:
Before You Begin
- Ensure you have the correct replacement ink cartridges for your specific HP Envy model.
- Make sure your printer is turned on.
Removing the Old Ink Cartridges
When a cartridge is empty or low, you'll need to remove it to make way for a new one. Follow these steps:
- Turn on the printer. (As per reference)
- Load plain white paper in the input tray. (As per reference - this paper is often used later for alignment)
- Open the ink cartridge access door. This door is typically located on the front or top of the printer. Refer to your printer's manual if you are unsure where it is.
- Wait until the carriage is idle and silent before you continue. The print carriage, which holds the cartridges, will move to the center of the printer and stop. Do not attempt to remove cartridges while the carriage is moving. (As per reference)
- Lightly press down on the ink cartridge you wish to replace to release it, and then pull the ink cartridge out of its slot. (As per reference)
- Set the old cartridge aside for recycling or proper disposal.
Preparing the New Ink Cartridges
New cartridges come sealed to protect the ink.
- Remove the new cartridge from its packaging.
- Carefully remove any protective tape or plastic pull tabs. Be careful not to touch the copper-colored contacts or ink nozzles.
Installing the New Ink Cartridges
Now it's time to put the new ink to work.
- Hold the new cartridge by its sides with the contacts facing towards the printer.
- Slide the new cartridge into the empty slot. Each color usually has a designated slot.
- Push the cartridge firmly into the slot until it clicks into place.
After Installation
Once the new cartridges are installed:
- Close the ink cartridge access door.
- The printer may perform an automatic alignment process. Follow any on-screen prompts and wait for the process to complete. This ensures the best print quality.
Using genuine HP ink cartridges is recommended to ensure reliability and print quality for your HP Envy printer.
