Connecting an HP Deskjet printer can often be done wirelessly, and for specific models like the HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers, here's how to set up a Wi-Fi connection using WPS:
Connecting your HP Deskjet printer, particularly models designed for modern wireless networking, often involves a straightforward process. While connection methods can vary by model (including USB or wired Ethernet on some), a common and convenient method for many recent HP Deskjet printers is Wi-Fi, sometimes using the WPS method if your router supports it.
Connecting HP Deskjet via Wi-Fi (WPS Method)
For specific HP Deskjet models such as the HP Deskjet 6000 and 6400 series, HP ENVY 6000 and 6400 series, and HP Tango printers, you can often establish a wireless connection using a simple button sequence involving the printer and your Wi-Fi router's WPS function.
Follow these steps to connect these specific HP Deskjet models wirelessly using WPS:
- On the back of your HP Deskjet printer, press and hold the Wi-Fi button (often indicated by a wireless icon) and the Power button simultaneously.
- Keep holding these buttons for approximately five seconds.
- Release the buttons when you observe the blue bar on the printer flashing. This indicates the printer is ready to connect wirelessly.
- Once the blue bar starts flashing, you have a two-minute window to initiate the next step.
- Walk over to your Wi-Fi router and press and hold the WPS button on the router. The location and appearance of the WPS button vary by router model, but it's often labeled or has a specific icon.
- Hold the WPS button on your router until the connection process visibly begins (e.g., lights might flash differently).
- Allow the printer and router a few moments to establish the connection. The flashing blue light on the printer should become solid once successfully connected to your Wi-Fi network.
This WPS method simplifies the wireless setup for compatible HP Deskjet and ENVY models by avoiding the need to enter your network password directly into the printer or via a computer application for the initial connection.
For models not listed or if your router does not support WPS, other wireless setup methods typically involve using the HP Smart app or installing printer software on your computer, which guides you through selecting your Wi-Fi network and entering the password. Always check your specific printer model's manual or the HP support website for the most accurate connection instructions.
