Based on the provided reference, which details the measurement of hydraulic hose, the key measurements typically involve length and inside diameter. While the term "tubing" often refers to rigid or semi-rigid pipes, the reference describes the method for measuring flexible hydraulic hose.
Here is how hydraulic hose is measured according to the reference:
Key Measurements for Hydraulic Hose
When measuring hydraulic hose, the two crucial dimensions are its length and its diameter.
Measuring Hydraulic Hose Diameter (Inside Diameter - ID)
The diameter of a hydraulic hose is specifically measured as its Inside Diameter (ID). This determines the flow rate of the hydraulic fluid through the hose.
To measure the ID using the method described in the reference:
- Use a measuring tool: Obtain a ruler or tape measure.
- Measure across the inside: Measure the distance across the inside of the hose from one inner edge directly to the opposite inner edge.
- Exclude the outer layer: Do not include any external cover, sheath, or reinforcement layers in this measurement. Focus only on the clear inside passage of the hose.
This ID measurement is critical for ensuring the correct volume and pressure of fluid can pass through the line efficiently.
Measuring Hydraulic Hose Length
Measuring the length of a hydraulic hose is more straightforward:
- Locate the ends: Find the two ends of the hose you need to measure.
- Measure the distance: Use a tape measure to determine the distance between these two points. For hoses with fittings, the measurement is usually taken from the sealing surface or the very end of one fitting to the same point on the other fitting.
Summary of Hydraulic Hose Measurement
| Measurement | Method | Reference Detail | Purpose |
|---|---|---|---|
| Inside Diameter | Measure across the inside from inner edge to inner edge. | Do not include the cover or sheath in the measurement. | Determines flow rate. |
| Length | Measure the distance between the two ends (often fitting ends). | Locate the two ends of the hose to measure between. | Specifies required reach. |
Understanding these measurements ensures you select the correct hydraulic hose for your application, providing proper flow and reach within the system.
