Removing an IKEA 153 hinge is a simple process often involving releasing a clip located at the back of the hinge assembly attached to the cabinet.
Based on the provided reference, here's how you can typically remove this type of hinge:
Tools Needed
You will need one basic tool:
- Flathead Screwdriver
Step-by-Step Removal Guide
The key to detaching the hinge from the mounting plate on the cabinet is to disengage the locking mechanism, which is usually covered by a small panel.
Here are the steps:
- Locate the Release Panel: Look at the back of the hinge assembly where it connects to the mounting plate on the cabinet wall. You should find a little panel.
- Pry Up the Panel: Take your flathead screwdriver and insert it carefully under this small panel.
- Apply Gentle Pressure: Gently pry the panel upwards or outwards. The reference states you should "fry that up" (meaning pry it up).
- Listen for the Click: As you pry, the panel should pop loose, which disengages the hinge from the mounting plate.
- Remove the Hinge: Once the panel is released and the hinge is loose, you can lift or pull the hinge away from the cabinet mounting plate.
This method releases the hinge arm from the plate, allowing you to easily remove the hinge from the cabinet without unscrewing the plate itself. This is particularly useful when you need to remove the door but leave the mounting plate in place.
Remember to support the door when removing the last hinge to prevent it from falling.
