Stopping a jet ski involves disengaging the engine or power source. Based on the provided information, the primary ways to stop a jet ski are by pressing the START/STOP button or pulling the engine cut-off switch belt cover.
Methods for Stopping a Jet Ski
Safely bringing a jet ski to a halt is crucial for rider and passenger safety, as well as for preventing collisions. The provided reference specifically mentions stopping in the context of hand signals used on the water.
According to the reference:
- The hand signal "Arm up" indicates that you must either press the START/STOP button or pull on the engine cut-off switch belt cover to stop the boat.
This highlights two main mechanical methods:
- Pressing the START/STOP Button: Most modern jet skis have a dedicated button, often clearly labeled, which cuts the power to the engine when pressed.
- Pulling the Engine Cut-Off Switch: Jet skis are equipped with an engine cut-off switch, often attached to a lanyard that the rider wears. Pulling on the belt cover connected to this switch will disengage the engine, acting as an emergency stop and also a safety measure if the rider falls off.
These actions directly align with the "Arm up" hand signal, which is a standard communication method on the water to indicate the need to stop.
Hand Signals and Jet Ski Control
Understanding basic hand signals is part of operating a jet ski safely. The reference connects these signals to specific actions:
- Arms Up in Circles: Apply the throttle (accelerate).
- Move Your Hand Up and Down: Release the throttle (slow down).
- Arm Up: Press START/STOP or pull engine cut-off switch (stop).
| Hand Signal | Action Recommended by Reference |
|---|---|
| Arms Up in Circles | Apply throttle (Accelerate) |
| Hand Up and Down | Release throttle (Slow Down) |
| Arm Up | Press START/STOP or Pull Engine Cut-Off (Stop) |
Always ensure you are in a safe area away from obstacles and other watercraft before attempting to stop completely. Practice using both the START/STOP button and the engine cut-off switch in a controlled environment to become familiar with their function.
