How Do You Clean a Copper Anklet?

You can clean a copper anklet effectively using a simple homemade paste of vinegar and baking soda.

Here’s a detailed guide on how to clean your copper anklet:

Cleaning Method: Vinegar and Baking Soda Paste

This method is effective for removing tarnish from copper.

Prepare the Paste: Mix white vinegar and baking soda to form a paste. The ratio is typically 1:1, but you may adjust it to get a good consistency.
Apply the Paste: Apply the paste evenly over the surface of the copper anklet. Make sure to cover all tarnished areas.
Let it Sit: Allow the paste to sit on the anklet for up to an hour, depending on the severity of the tarnish. Check periodically to see if the tarnish is lifting.
Rinse Thoroughly: Rinse the anklet thoroughly with water to remove all traces of the paste.
Polish: Use a soft cloth to polish the anklet. This will remove any remaining residue and restore its shine. A microfiber cloth works well for polishing.

Avoid Abrasives: Do not use abrasive cleaners or scouring pads, as they can scratch the copper.
Gentle Scrubbing: If necessary, use a soft brush (like an old toothbrush) to gently scrub stubborn tarnish.
Drying: Ensure the anklet is completely dry after cleaning to prevent water spots.
Storage: Store your copper anklet in a dry place, ideally in a sealed bag or jewelry box, to minimize exposure to air and moisture, which can cause tarnish.

By following these steps, you can effectively clean your copper anklet and keep it looking its best.