Rings are soldered by jewelers using a specific process involving a solder alloy.
Soldering rings involves a process where expert jewelers place small amounts of alloy between the rings being soldered. They then heat the solder alloy, effectively fusing the rings together. This solder acts as a permanent bond, essentially a "permanent glue that holds your rings together." While the bond is designed to be lasting, it is also mentioned that "If you choose to separate your soldered rings in the future, there are techniques that can help."
Here's a breakdown of the process based on the reference:
- Preparation: The rings are cleaned and prepared for soldering.
- Solder Placement: A small amount of solder alloy is carefully placed at the point where the rings are to be joined.
- Heating: The solder alloy is then heated to its melting point.
- Fusion: As the solder melts, it flows into the joint between the rings and fuses them together upon cooling.
The solder alloy used typically has a lower melting point than the metal the rings are made from, allowing it to melt and bond the rings without damaging the original metal. This creates a strong, seamless connection.
Although the soldering is a permanent join, it is possible to reverse the process if you decide to wear the rings separately again in the future. Special techniques are used by jewelers to safely break the solder joint and clean the rings.
