To change the code on a Master Lock 5401 key safe, you need to first open the unit using the current code, which is four zeros when new, then press a reset button.
Here's a detailed guide on how to do that:
Steps to Change the Code on a Master Lock 5401 Key Safe:
-
Open the Key Safe:
- Enter the current combination. The factory default code is 0-0-0-0.
- Open the unit after entering the correct code.
-
Locate the Reset Button:
- Once opened, look for a small reset button inside the key safe.
-
Engage the Reset Button:
- Push the reset button across, often sliding to the side to enable code changing.
-
Set your New Combination:
- While the reset button is still engaged, dial in your new 4-digit code using the key safe's combination dials.
- Complete Reset:
- Return the reset button to its original position.
- Test the New Code:
- Close the key safe and dial the new code to check if it opens.
Important Considerations:
-
Remember Your Code: Write your new combination down or store it securely as you will need this to open your key safe.
-
Carefully follow the steps: The reset process could differ slightly if you have a different type of key safe. Always refer to the manufacturer’s instructions if needed.
-
Video Reference: The instructions above align with the Securikey - Master Lock 5401 Code Change Instructions - YouTube video, available between 0:17 and 1:30.
