Leveling the ground for a sandbox typically involves digging, preparing the base, and ensuring a smooth, even surface. Here's a step-by-step guide:
-
Dig Out the Area: Excavate the area where your sandbox will sit. Dig down several inches (the reference mentions digging inches into the ground). This creates a recessed area to contain the sand and sandbox frame.
-
Prepare the Base (Optional but Recommended): While not explicitly mentioned, consider adding a layer of landscape fabric or weed barrier to the bottom of the excavated area. This will help prevent weeds from growing up into the sandbox and keeps the sand cleaner.
-
Add a Leveling Layer of Sand: Spread a one-inch layer of sand evenly across the bottom of the excavated area. This layer acts as a leveling compound. If there are any bumps or dips, use the sand to fill them in and create a smooth, even surface.
-
Check for Level: Use a level (a spirit level or a laser level) to check that the surface is level. Place the level in several different directions to ensure evenness. Add or remove sand as needed to achieve a perfectly level surface.
-
Compact the Sand: Lightly compact the sand with a hand tamper or even just by walking on it. This helps to settle the sand and create a more stable base.
-
Install the Sandbox Frame: Once the sand base is level and compacted, you can place your sandbox frame on top. The reference mentions laying your first frame after leveling.
In summary, leveling the ground for a sandbox involves digging out the area, optionally adding a weed barrier, spreading a layer of sand to correct any unevenness, checking for level, compacting the sand, and finally installing your sandbox frame.
