To clean a push mower air filter, specifically a complete foam type, you can wash it using hot soapy water, then rinse it out and squeeze it dry.
Cleaning your lawn mower's air filter is a vital part of routine maintenance that ensures optimal engine performance and longevity. The process varies depending on the type of filter your mower uses. Based on the provided reference, here's how to clean a complete foam air filter.
Steps for Cleaning a Foam Air Filter
As shown in the reference, if your lawn mower is equipped with a complete foam air filter, you can easily clean it yourself. The steps involve washing and rinsing.
Here’s a simple breakdown:
- Preparation: First, remove the air filter from its housing on the mower.
- Washing: Place the foam filter in a basin or sink. Use hot soapy water. Gently wash the filter by hand, working the soapy water through the foam to loosen dirt and debris.
- Rinsing: After washing thoroughly, rinse the filter with clean water. Continue rinsing until all soap residue is gone and the water runs clear when squeezed through the foam.
- Drying: Give them a good squeeze to remove excess water. It's important to ensure the filter is completely dry before reinstalling it in the mower. Air drying is recommended; avoid using heat sources that could damage the foam.
Once the filter is completely dry, you can place it back into its housing into place.
Summary Table: Cleaning a Foam Air Filter
| Step | Action | Details |
|---|---|---|
| Remove | Take filter out of housing | Locate and open the air filter cover. |
| Wash | Use hot soapy water | Work soap through the foam. |
| Rinse | Use clean water | Remove all soap residue. |
| Dry | Squeeze out excess water, air dry | Ensure filter is completely dry before use. |
| Reinstall | Place filter back in housing | Secure the cover properly. |
This method, specifically for foam filters, helps remove accumulated dirt, allowing for better airflow to the engine.
