The LG OE error typically indicates a drainage issue with your washing machine. One common and effective way to fix this problem is by cleaning the pump filter.
Understanding the LG OE Error (OE Code)
When your LG washer displays the OE error code, it means the machine is unable to drain the water properly. This can happen for various reasons, but often the blockage or restriction is located in the drainage system, particularly the pump filter.
Fixing the OE Error: Cleaning the Pump Filter
As highlighted in the reference, cleaning a potentially clogged pump filter is a primary step to resolve the OE error. A dirty filter can restrict water flow, preventing the washer from draining.
Here are the steps to clean the pump filter:
- Access the filter: The pump filter is usually located behind a small access panel at the bottom front of the washing machine. Gently open or remove this panel. Be prepared with a towel and a shallow container, as some residual water may drain out.
- Locate and remove the filter: You will see a cap or knob which is the pump filter. Slowly unscrew or turn the filter counter-clockwise to remove it. Allow any remaining water to drain into your container.
- Clean thoroughly: Inspect the filter for lint, coins, buttons, or any other debris that might be blocking it.
- Rinse under running water: Hold the filter under a faucet and rinse it thoroughly.
- Brush off any debris: Use a small brush (like an old toothbrush) if necessary to remove stubborn buildup or lint.
- Clean the filter housing: Also, check inside the filter housing area within the washer for any large objects or debris that might have been left behind.
- Reinstall the filter: Once the filter is clean, screw it back into its place securely. Make sure it is properly seated to prevent leaks.
- Close the access panel: Replace the front access panel.
After cleaning the filter, run a quick drain or rinse cycle without any clothes to check if the machine drains properly and the OE error is resolved. If the error persists, there might be other issues such as a blocked drain hose or a faulty drain pump, which might require further troubleshooting or professional service. However, cleaning the pump filter is a crucial first step based on common causes and the provided reference.
