Fitting a mortice lock involves inserting the lock body into the prepared slot in the door and securing it correctly.
Once the mortice slot and faceplate recess have been accurately cut into the door edge, the next steps focus on installing the lock itself. According to the provided information, the process involves inserting the lock body and securing it in place.
Here are the key steps based on the reference:
- Insert the Lock: Carefully place the mortice lock body into the prepared slot in the edge of the door. Ensure it fits snugly.
- Reference Insight: "Together insert the lock into the slot." This highlights the action of placing the lock into the cut-out.
- Tap into Place: If needed, gently tap the lock body into its final position within the slot.
- Reference Insight: "And tap into place with a hammer." This suggests a hammer might be used gently to seat the lock body correctly.
- Secure with Screws: Insert the appropriate screws through the faceplate of the lock and into the door edge. Tighten these screws to hold the lock firmly in place.
- Reference Insight: "insert screws to secure." Securing the lock body is crucial for its function and stability.
- Add Cover Plates: Finally, attach any screw cover plates over the visible keyholes or spindle holes on the faceplate to finish the installation neatly.
- Reference Insight: "The lock and screw cover plates over the key holes to finish off." This step provides a tidy appearance and can also offer slight protection.
This process describes securing the lock body after the necessary preparations (marking, drilling, chiseling the mortice and faceplate recess) have been completed.
