To reset a combination lock on a locker, the process generally involves a specific sequence of actions, which can vary slightly depending on the lock type. Here's a general procedure based on the provided reference:
Based on the YouTube video titled "How to Change the Combination on a Cable Lock", here's a general method for resetting a cable lock, often used on lockers.
- Initial State: Ensure your lock is currently unlocked. Typically, this is done by having the combination set to the current correct number.
- Locate the Reset Button: Look for a small button or pin on the side or bottom of the lock body.
- Push the Reset Button: With the lock unlocked, press and hold the reset button.
- Change the Combination: While holding the reset button, rotate the dials to your new desired combination.
- Release the Reset Button: Once you have set your desired combination, release the reset button. The lock is now set with the new combination.
- Test the New Combination: Verify the lock is correctly set by attempting to open it with the new combination.
- Push the Button Back Out: As shown in the video excerpt, "Press that once I press this back in it'll set the lock by pushing that button back out." This often means pushing the button or mechanism in that was depressed to set the lock.
Here's a table summarizing the reset process:
| Step | Action |
|---|---|
| 1 | Ensure the lock is unlocked. |
| 2 | Locate the reset button. |
| 3 | Push and hold the reset button. |
| 4 | Set the new combination. |
| 5 | Release the reset button. |
| 6 | Test the new combination. |
| 7 | Push button back out to finalize reset. |
Important Notes:
- Not all locks have reset buttons. Some may require a different method.
- Always record your new combination somewhere safe and accessible.
- If the lock is a built-in locker lock, you might need a master key or assistance from a facility manager to reset it.
- If you have a dial combination lock, it may require a different, precise sequence of rotations to reset the combination.
