To reset your mesh WiFi device, you typically perform a hard reset by using the physical reset button.
Performing a hard reset is a common troubleshooting step that returns the device to its factory default settings. This process is often necessary when you encounter persistent connectivity issues, need to reconfigure your network, or are selling or gifting the devices.
Performing a Hard Reset on Your Mesh Device
The most common method for resetting a mesh WiFi device involves pressing and holding a specific button on the unit itself. Based on the provided information, here is the typical procedure:
- Locate the Reset Button: Find the small reset button on your mesh WiFi unit. This button is often recessed and may require a paperclip or pin to press. Consult your device's manual if you have trouble finding it.
- Press and Hold: With the device powered on, press and hold the reset button.
- Observe the LED: Keep holding the button until the device's LED indicator light changes. The reference states you should hold the reset button until the LED flashes red.
- Release the Button: Once the LED flashes red, release the reset button.
- Wait for Confirmation: The LED should change again to indicate the reset is complete and the device is ready for setup. According to the reference, the LED will change to a blue flash.
Note: LED colors and patterns may vary slightly depending on the brand and model of your mesh WiFi system.
What Happens After the Reset?
Once the hard reset is complete, the mesh device will revert to its original factory settings. This means it will no longer be connected to your existing mesh network.
You will typically need to:
- Use the manufacturer's mobile app.
- Follow the app's App install wizard to reinstall and set up the device again.
This process integrates the reset device back into your mesh network or allows you to set up a new network from scratch.
In summary: Resetting a mesh WiFi device usually involves finding the reset button, holding it until the LED indicates the reset process has started (often a red flash), releasing it, and then waiting for the device to be ready for reinstallation via the system's app.
