To apply moulding between two inside corners, begin by accurately measuring the space, cutting the moulding to fit, predrilling nail holes aligned with wall studs, nailing the piece in place, and finally using a nail set for a smooth, professional finish that prevents surface damage.
Applying moulding adds a polished touch to any room, and fitting a piece precisely between two inside corners is a common task. This guide focuses on the specific steps for installing a straight piece of moulding in this scenario, ensuring a secure fit and clean look based on a fundamental method.
Applying Moulding: A Simple Method
This approach is straightforward and effective for connecting moulding pieces directly between existing inside corner joints or wall surfaces.
Preparation and Measurement
Before you begin, ensure you have your moulding piece and necessary tools ready. The first critical step involves accurate measurement.
- Measure the distance between two inside corners where the moulding will be installed. Take the measurement at the exact point where the moulding will sit on the wall. Accuracy here is key for a tight fit.
Cutting and Predrilling
Once you have your precise measurement, it's time to prepare the moulding piece itself.
- Cut a piece of moulding to fit between the corners based on your measurement. Use a saw appropriate for your moulding material for a clean, square cut.
- Predrill the moulding to correspond to every wall stud. This step is crucial for preventing the wood from splitting when you drive nails through it. Use a drill bit slightly smaller than your nail diameter. You'll need to locate the wall studs beforehand (a stud finder is helpful here, though not explicitly in the reference).
Securing the Moulding
With the moulding cut and predrilled, you can now attach it to the wall.
- Nail the moulding in place on the wall. Drive nails through the predrilled holes and into the wall studs. Nailing into studs provides the most secure hold.
Finishing the Nailing
To achieve a professional appearance without damaging the moulding's surface, a specific tool is used for the final step.
- To avoid denting the moulding, use a nail set to finish driving the nails in. A nail set is a tool used to drive the head of a nail slightly below the surface of the wood. This protects the surrounding moulding from hammer marks and allows for easier filling later if desired.
Essential Tools for This Task
Having the right tools makes the job much smoother. Here's a quick overview of what you'll need based on the described process:
| Tool | Primary Function |
|---|---|
| Measuring Tape | Obtaining precise length measurements |
| Saw | Cutting the moulding to the required length |
| Drill | Creating predrill holes in the moulding |
| Nails | Fastening the moulding to the wall |
| Nail Set | Sinking nail heads below the surface |
Following these steps ensures your moulding piece is cut to the correct size, securely fastened, and finished neatly, providing a clean transition between inside corners.
