How do I find my scanner IP address?

Unfortunately, the provided "short answer" isn't reliable for finding only your scanner's IP address. The netstat -r command displays the routing table, which shows network routes, not a list of all devices on your network.

Here's how you can accurately find your scanner's IP address, depending on how your scanner is connected to your network:

1. Check your Scanner's Control Panel/Display

Many scanners with network capabilities (especially those connected via Ethernet or Wi-Fi) have a built-in display that shows their IP address directly.

• Look for a "Network Settings" or "Wi-Fi" section in the scanner's menu. Navigate through the menus using the scanner's buttons.
• The IP address is usually displayed as four numbers separated by dots (e.g., 192.168.1.100).

2. Use your Router's Web Interface

Your router acts as a central hub on your network and knows the IP addresses of all connected devices.

• Find your router's IP address: This is typically the "Default Gateway." On Windows, you can find it by opening Command Prompt (type cmd in the search bar and press Enter) and running the command ipconfig. Look for "Default Gateway." On macOS, open Terminal (search for it in Spotlight) and run netstat -nr | grep default. The router's IP address will be listed.
• Open a web browser and enter your router's IP address in the address bar. This will take you to your router's login page.
• Log in using your router's username and password. These are often printed on a sticker on the router itself. If not, consult your router's manual or the manufacturer's website.
• Look for a section like "Attached Devices," "Device List," or "DHCP Client List." The exact wording varies depending on your router's manufacturer.
• Browse the list of connected devices. Identify your scanner by its name (e.g., "Epson Scanner," "Brother MFC," etc.) or its MAC address (printed on the scanner itself). The corresponding IP address will be listed next to it.

3. Use Scanner Software (if available)

Some scanner manufacturers provide software that allows you to manage the scanner, including finding its IP address.

• Install the scanner software from the manufacturer's website or the installation disc.
• Open the software and look for a "Network Settings" or "Connection Settings" section.
• The software should display the scanner's IP address, or allow you to search for the scanner on the network.

4. Network Scanning Tools

If the above methods fail, you can use network scanning tools like Angry IP Scanner or Nmap. These tools scan your network and list all connected devices and their IP addresses. Be cautious when using third-party network scanners, and only download them from reputable sources.

• Download and install a network scanning tool.
• Run the tool and configure it to scan your network's IP address range. Typically, this will be something like 192.168.1.1 to 192.168.1.254.
• The tool will display a list of all connected devices, including your scanner and its IP address.

By using one of these methods, you should be able to find your scanner's IP address. Remember to note down the IP address for future reference.