askvity

What is the IP address of ONT?

Published in Networking 3 mins read

The default IP address of an ONT (Optical Network Terminal) is typically 192.168.1.1, with a subnet mask of /24 (255.255.255.0).

While 192.168.1.1 is common, it's important to understand that:

  • Default vs. Current: This is the default IP address. The actual IP address of your ONT might be different if it was changed during setup or by your internet service provider (ISP).
  • Dynamic vs. Static: Your ONT might receive its IP address dynamically from your ISP (using DHCP). In this case, the IP address can change periodically. Alternatively, your ISP might assign a static IP address, which remains constant.
  • Management vs. Internet Access: The 192.168.1.1 address (or similar private IP address) is usually for accessing the ONT's configuration interface. The IP address your ONT uses to connect to the internet is a different, public IP address assigned by your ISP.

How to find your ONT's Current IP Address (Management Interface):

  1. Check the ONT's Label: Look for a sticker on the ONT itself. It might list the default IP address, username, and password for accessing the configuration interface.
  2. Consult your ISP's Documentation: Your internet service provider should have documentation on their equipment, including the default IP address.
  3. Access your Router's Configuration: Log in to your router's web interface (typically by typing 192.168.0.1 or 192.168.1.1 into your web browser). Look for a section that lists connected devices or the WAN (Wide Area Network) IP address. The IP address listed there is the public IP address assigned to your router by the ONT. You might also find your ONT listed as a connected device, which would show its IP address.
  4. Use Network Scanning Tools: You can use network scanning tools (like nmap or Angry IP Scanner) to scan your local network and identify the ONT by its MAC address or hostname (if available).

Example: Accessing the ONT Configuration (if applicable)

If your ONT is configured to allow direct access to its management interface using the default IP (192.168.1.1), you would:

  1. Connect a computer directly to one of the ONT's Ethernet ports (if available and enabled - this is not always possible).
  2. Configure your computer's network adapter to use a static IP address in the same subnet as the ONT (e.g., 192.168.1.10, subnet mask 255.255.255.0, gateway 192.168.1.1).
  3. Open a web browser and enter 192.168.1.1 in the address bar.
  4. Enter the username and password (usually found on the ONT's label or in your ISP's documentation).

Important: Directly accessing the ONT's configuration interface is not always necessary or even possible, and it should only be done if you are comfortable with network configuration. Incorrect settings can disrupt your internet service.

In summary, while the default IP address of an ONT is often 192.168.1.1, the actual IP address might vary depending on your ISP's configuration. It's crucial to check your ISP's documentation or the device itself to find the accurate information.

Related Articles