To change the combination on a Squire CP combination padlock, you don't need a special tool. You can simply change the code by following these steps:
Steps to Change Your Squire Padlock Combination
- Locate the Screw: Find the small screw on the body of the padlock.
- Unscrew: Using an appropriate screwdriver, carefully unscrew and remove this screw.
- Hold the Unlocking Button: Press and hold the unlocking button.
- Turn the Wheels: While holding the button, rotate the number wheels to your desired new combination.
- Release the Button: Once you've set the new code, release the unlocking button.
- Re-attach the Screw: Replace the screw and tighten it securely.
That's it! Your Squire padlock now uses the new combination you've set.
Detailed Breakdown
| Step | Action | Notes |
|---|---|---|
| 1. Find the Screw | Look for the small screw on the padlock's body. | This screw allows access to the recoding mechanism. |
| 2. Unscrew the Screw | Use a screwdriver to remove the screw completely. | Keep the screw in a safe place so you don't lose it. |
| 3. Hold the Button | Press and hold the unlocking button. | This button engages the recoding mechanism allowing the wheels to be turned freely. |
| 4. Set New Combination | Turn the number wheels to set your desired new combination. | Make sure to turn the wheels fully to ensure the new combination is correctly set. Make a note of your new combination. |
| 5. Release the Button | Let go of the unlocking button. | The wheels should now be locked at your new combination. |
| 6. Reattach the Screw | Place the screw back into its hole and tighten it securely with the screwdriver. | Ensuring the screw is tightened properly is important so the padlock's recoding mechanism works correctly and isn't compromised. |
Important Notes
- Make sure you remember your new combination. It's recommended to write it down and keep it safe, away from the lock.
- Do this process in a well lit and comfortable area.
- Always double-check the new combination before securing it.
These instructions are based on the provided reference, that states: "To change the code, you simply unscrew a screw, hold in an unlocking button and turn the wheels to the desired numbers."
