To apply clear glaze, you'll use a damp cloth to evenly wipe the glaze onto the painted surface.
Here's a step-by-step guide:
-
Prepare Your Cloth: Dampen a clean, colourless cloth with water. Ensure the cloth is clean to avoid transferring any unwanted color or particles to the glaze.
-
Remove Excess Moisture: Squeeze the cloth thoroughly to remove all excess water. The cloth should be damp, not wet. Too much water will dilute the glaze.
-
Absorb the Glaze: Dip the dampened cloth completely into your clear glaze mixture. Allow the cloth to absorb a sufficient amount of glaze.
-
Remove Excess Glaze: Again, squeeze the cloth to remove any excess glaze. You want the cloth to be saturated, but not dripping.
-
Apply Evenly: In a well-lit room, evenly wipe the glaze onto the painted surface. Working in good lighting is crucial to ensure complete and uniform coverage. Avoid applying too much glaze in one area, as this can lead to uneven drying or runs.
-
Check for Coverage: Regularly inspect the surface to ensure the entire area is covered with a thin, even layer of glaze.
Important Considerations:
- Work Environment: Adequate lighting is essential for proper application.
- Cloth Material: Use a clean, lint-free cloth.
- Application Technique: Apply the glaze in smooth, even strokes.
- Drying Time: Allow sufficient drying time as specified by the glaze manufacturer before applying additional coats or handling the project. Refer to the product's instructions for recommended drying times and additional coats (if applicable).
