Measuring for a wall partition involves establishing the required dimensions and verifying site conditions to ensure a proper fit.
To accurately measure for a wall partition, you need to determine the required length and height, and assess the floor's evenness.
Essential Measurement Steps
According to the guide, the process begins with planning and then moves to specific measurements. Here are the key steps:
- Choose an Office Design Layout: Before measuring, have a clear plan of where the partitions will go. This defines the areas you need to measure.
- Establish the Length of the Partitions: Measure the required length of the partition run along the floor, typically from wall to wall or between other partitions/obstructions. Ensure this measurement is recorded in metres.
- Measure the Height of the Room: Measure the vertical distance from the finished floor to the ceiling where the partition will be installed. This measurement should also be in metres. It's wise to take height measurements at multiple points along the partition line to check for variations.
- Check the Floor is Even: After measuring the height, use a spirit level along the proposed partition line to check if the floor is level. Uneven floors can impact the partition's installation and fit.
Detailed Measurement Considerations
Beyond the basic length and height, consider these points for accuracy:
- Multiple Points: Take measurements at several points for both length and height, especially in older buildings, as walls, floors, and ceilings may not be perfectly straight or level.
- Obstructions: Note the location and size of any obstructions like columns, radiators, skirting boards, or power outlets that the partition will need to accommodate or work around.
- Doorways: If the partition includes a doorway, mark its planned position and desired width.
Recording Your Measurements
Keeping a clear record of your measurements is crucial. A simple table can be very helpful:
| Measurement Item | Units | Value 1 | Value 2 (if multiple) | Notes |
|---|---|---|---|---|
| Partition Length | Metres | E.g., Wall-to-wall | ||
| Room Height | Metres | E.g., Floor-to-ceiling at start/end | ||
| Floor Level | Status | Level | Slight Slope | E.g., Needs packing/adjustment |
| Obstructions | Location | E.g., Skirting height, Radiator pos |
By following these steps and considerations, you can obtain the necessary measurements to plan and order wall partitions effectively.
For more details on the process, refer to the Office Partition Measuring Guide.
