To apply adhesive to pavers, you typically use a caulk gun with a suitable construction adhesive, cutting the tube tip to size, inserting it into the gun, and applying the material in a pattern like a zigzag.
Applying adhesive is a crucial step for securing pavers in certain applications, such as on vertical surfaces or edges. The method described in the provided reference outlines a common technique using a tube adhesive and a caulk gun.
Steps for Applying Paver Adhesive
According to the information provided, the process for applying Polyurethane Construction Adhesive involves the following steps:
- Prepare the Tube: Cut the tip of the adhesive tube. The size of the cut opening will determine the bead size of the material dispensed. Choose a size appropriate for the gap or surface area requiring adhesive.
- Load the Caulk Gun: Insert the prepared adhesive tube into a standard caulk gun.
- Begin Application: Pull the trigger of the caulk gun to start releasing the adhesive.
- Apply the Adhesive: Apply the Polyurethane Construction Adhesive onto the paver or the surface the paver will adhere to. A recommended pattern is a zigzag.
- Manage Excess: If there is excess caulk after application, use your finger to wipe it off as needed.
These steps outline the practical application process using a specific type of adhesive and tool as detailed in the reference from Western Interlock.
Key Materials and Tools
- Adhesive: Polyurethane Construction Adhesive
- Tool: Caulk Gun
Application Pattern
| Pattern | Description |
|---|---|
| Zigzag | Recommended application pattern for even coverage |
Applying adhesive in a zigzag pattern helps ensure good contact and spread of the material across the bonding surface.
Remember that proper surface preparation, including cleaning both the paver and the substrate, is essential for the adhesive to bond effectively, although this specific detail was not included in the provided reference steps. Always follow the manufacturer's instructions for the specific adhesive product you are using.
