Cleaning a Litter-Robot involves both regular maintenance and deeper cleaning. Here's a breakdown of how to do both:
Regular Maintenance (Emptying and General Cleaning)
These steps help maintain a clean and odor-free environment:
-
Empty the Waste Drawer: The frequency depends on the number of cats and their usage, but typically every few days to once a week is recommended. Remove the drawer liner (if using) and dispose of the waste. Replace the liner if needed.
-
Wipe Down Interior: Periodically wipe down the inside of the globe with a damp cloth or pet-safe cleaning wipe to remove any stuck-on litter or debris.
-
Add Litter: As needed, add more litter to the globe to maintain the fill line.
-
Clean the Exterior: Wipe down the exterior of the unit with a damp cloth to keep it looking clean.
Deep Cleaning Your Litter-Robot
For a more thorough clean, follow these steps:
-
Cycle and Empty:
- Press the "Empty" button on the control panel. This will cycle the globe clockwise, depositing all the litter into the waste drawer.
- Remove the waste drawer and dispose of the contents.
-
Remove the Globe:
- Turn the Litter-Robot OFF and unplug the unit.
- Lift the bonnet off.
- Remove the globe. There may be instructions specific to your model in the user manual.
-
Wash the Globe:
- Rinse the globe with water to remove loose debris.
- Wash the globe with a mild soap and water solution. Ensure it is pet-safe.
- Rinse thoroughly to remove all traces of soap.
- Allow the globe to completely dry before reassembling.
-
Clean the Base:
- Wipe down the interior of the base with a damp cloth and pet-safe cleaner.
- Pay attention to the sensors and make sure they are clean and free of debris.
-
Clean the Bonnet (Hood): Wipe down the inside and outside of the bonnet with a damp cloth and pet-safe cleaner.
-
Reassemble:
- Once all parts are completely dry, reassemble the Litter-Robot.
- Place the globe back into the base.
- Replace the bonnet.
- Plug the unit back in and turn it on.
-
Add Litter: Add fresh litter to the globe, filling it to the appropriate fill line.
Additional Tips:
- Use Pet-Safe Cleaners: Always use cleaners that are safe for pets to avoid any potential health risks.
- Allow to Dry Completely: Ensure all components are completely dry before reassembling to prevent mold or mildew growth and to ensure the unit functions properly.
- Check Seals: Periodically check the seals around the waste drawer and globe for any damage or wear and tear. Replace if necessary.
- Refer to the Manual: Consult your Litter-Robot's user manual for specific instructions and recommendations for your particular model.
By following these steps, you can keep your Litter-Robot clean and functioning properly, providing a hygienic environment for your cat.
