How do you use plaster bond?

Using plaster bond involves preparing the surface and applying the product correctly to ensure proper adhesion for subsequent layers. Based on the provided references, the process focuses on the application method, drying time, and clean-up.

Plaster bond, often used as a bonding agent or primer, is typically applied to surfaces like cement or gypsum plaster to create a strong bond before applying finishes such as paints, textures, or new plaster coats.

## Step-by-Step Guide to Using Plaster Bond

Applying plaster bond correctly is crucial for achieving a durable finish. Follow these steps based on the product instructions:

1.  **Choose Your Application Tool:** You can apply Professional Trade Plasterbond using either a **brush** or a **lambswool roller**. Select the tool that best suits the size and accessibility of the area you are working on.
2.  **Prepare the Product:** This product **should be applied without thinning**. Use it directly from the container.
3.  **Apply the Plasterbond:** Apply the Professional Trade Plasterbond to the surface. For cement or gypsum-plastered surfaces, specifically follow the application method described under the guidelines for "New Surfaces" for the best results.
4.  **Allow for Drying Time:** If multiple coats are required or before applying subsequent materials (like paint or new plaster), allow **1 to 3 hours drying time between coats**.
5.  **Clean Your Tools:** After finishing the application, **clean tools with water**.

## Key Application Details

Here's a summary of the essential instructions for using Plaster Bond:

*   **Application Method:** Brush or Lambswool Roller
*   **Thinning:** Do not thin. Use as is.
*   **Specific Surface Application:** Apply as described under "New Surfaces" for cement or gypsum-plastered areas.
*   **Drying Time:** 1 to 3 hours between coats (or before applying next layer).
*   **Clean-Up:** Clean tools with water.

Understanding and following these specific instructions will help ensure the plaster bond performs effectively, providing a reliable base for your finishing work.

| Aspect              | Instruction Based on References                  |
| :------------------ | :----------------------------------------------- |
| **Application Tool** | Brush or Lambswool Roller                        |
| **Thinning**        | Apply without thinning                           |
| **Surface Type**    | Cement or Gypsum-Plastered Surfaces              |
| **Application Rule**| Apply as described under "New Surfaces" guide    |
| **Drying Time**     | 1 to 3 hours between coats                       |
| **Tool Cleaning**   | Clean tools with water                           |

Proper application, ensuring the correct drying time, and using the product un-thinned are vital for its performance as a bonding agent.