Cleaning plastic playgrounds is straightforward and primarily involves using basic cleaning solutions. Here's a detailed guide on how to effectively clean your plastic playground equipment:
Simple Cleaning Method
For general dirt and grime removal, the following method is effective and safe for most plastic playground surfaces:
-
Materials:
- Soap or detergent
- Water
- Soft cloths or sponges
- Buckets
- Hose or water source
-
Steps:
- Prepare: Fill a bucket with warm water and add soap or detergent.
- Apply: Using a cloth or sponge, apply the soapy water to the plastic surfaces.
- Scrub: Gently scrub the surfaces to remove dirt and grime.
- Rinse: Rinse the playground equipment thoroughly with clean water using a hose or by pouring water from a bucket.
- Dry: Allow the playground equipment to air dry or wipe down with a clean, dry cloth.
Considerations for Pressure Washing
Some manufacturers do not recommend using pressure washers because the high pressure could damage the surface of the equipment. If the manufacturer of your playground equipment approves pressure washing:
- Use lower pressure: Opt for a lower pressure setting to avoid damage.
- Test an inconspicuous area: Test pressure washing in a small, hidden area first to check for any adverse effects.
- Use plain water only: Only use plain water when pressure washing; do not add any detergents or soaps as these may damage the equipment with high pressure.
Key Points to Remember
- Regular Cleaning: Establish a cleaning schedule to maintain the playground's cleanliness and longevity.
- Manufacturer Guidelines: Always refer to the manufacturer's cleaning recommendations for your specific equipment.
- Avoid Harsh Chemicals: Do not use harsh chemicals, abrasive cleaners, or solvents, as they may damage the plastic.
- Safety First: Ensure the playground is dry before allowing children to use it, to prevent any slips or falls.
By following these steps, you can effectively and safely clean your plastic playground, keeping it a fun and enjoyable space for children.