To install pipe thread sealant, first degrease the pipe and the valve or fitting. Then, apply a bead of sealant around the male thread before screwing the valve fitting onto the pipe.
Here's a step-by-step breakdown:
- Degrease: Clean the threads of both the pipe and the fitting (or valve) you'll be connecting. This removes any oil, grease, or debris that might prevent a good seal.
- Apply Sealant: Apply a bead of thread sealant around the entire male thread.
- Connect: Carefully screw the fitting (or valve) onto the pipe.
The reference video demonstrates the basic principle, as it says: "...First degrease the pipe and valve or fitting. We use a fitting today as an example. Then apply a bead of sealant around the male thread. Now screw the valve fitting on the pipe...."
Here's a table summarizing the steps:
| Step | Action | Purpose |
|---|---|---|
| 1. Degrease | Clean pipe and fitting threads | Remove contaminants for proper sealant adhesion |
| 2. Apply | Apply sealant around male thread | Ensure sealant covers the threads for sealing |
| 3. Connect | Screw fitting onto pipe | Create the sealed connection |
