Changing a tap involves several steps, from shutting off the water supply to connecting the new tap. Here's a step-by-step guide:
Step 1: Turn Off the Water Supply
Before you begin, shut off the water supply to the tap you're replacing. This is usually done via isolation valves located under the sink or, if those aren't present, by turning off the main water supply to your house.
Step 2: Remove the Old Tap
Carefully disconnect and remove the old tap. This may involve loosening nuts and disconnecting the water supply pipes. Have a bucket and towels handy to catch any remaining water.
Step 3: Clean the Tap Hole Area
Thoroughly clean the area around the tap hole. Remove any old sealant, grime, or debris to ensure a clean surface for the new tap.
Step 4: Prepare the New Tap (Implied)
Consult the manufacturer's instructions for your new tap. This often involves attaching flexible hoses or other components.
Step 5: Remove the Nut from the New Tap
Remove the nut (or securing mechanism as directed by the manufacturer) that will hold the tap in place.
Step 6: Secure the Tap in Place
Carefully insert the new tap into the tap hole and secure it from underneath using the nut (or securing mechanism). Tighten the nut to hold the tap firmly in position, ensuring it's properly aligned.
Step 7: Connect the Supply Pipes
Connect the water supply pipes to the new tap's inlets. Ensure the connections are tight and leak-free. You may need to use plumber's tape or sealant to achieve a watertight seal.
Important Safety Tips:
- Always turn off the water supply before starting any plumbing work.
- Use appropriate tools for the job to avoid damaging pipes or fittings.
- If you're unsure about any step, consult a qualified plumber.
