Removing a bath tap involves carefully isolating the water supply and disconnecting the fittings before taking the tap off.
Steps to Remove a Bath Tap
Based on the provided reference, the process of removing a bath tap involves several key steps to ensure safety and prepare for replacement.
Here are the steps you should follow:
- Turn off the water supply: This is the crucial first step. Before attempting any work on the tap, you need to isolate the water supply. This prevents flooding when you disconnect the pipes.
- Undo the tap connectors: Located beneath the bath, flexible tap connectors or solid pipework connect the tap to the water supply. You'll need a spanner or wrench to carefully loosen and undo these connectors. Be prepared for a small amount of residual water to drain out.
- Remove your old taps: Once the connectors are detached, the taps are typically held in place by a large nut or retaining ring underneath the bath or basin surface. Remove your old taps by unscrewing this fixing nut from below. You may need another person to hold the tap steady from above while you do this.
- Clean the area: With the old taps removed, it's a good opportunity to clean the area around the tap holes before installing the new ones. This helps ensure a good seal for the new tap.
Following these steps allows you to safely and effectively remove your old bath taps, ready for potential replacement.
