To turn off the shower water in your bathroom, simply turn the shower handle(s) back to the "off" position.
Here's a more detailed breakdown:
-
Standard Shower Controls: Most showers use a handle or knob to control the water flow and temperature. Turning this handle back to the "off" position will shut off the water. This is typically done by rotating the handle back to its original starting position, or sometimes pushing it in.
-
Mixer Valves: Some showers have a single handle that controls both temperature and water flow. Moving this handle away from the "on" position (usually towards the center or fully to one side) will shut off the water.
-
Thermostatic Valves: These valves maintain a consistent water temperature. To turn off the water, look for a separate control or button to stop the flow. The temperature setting will remain unchanged.
-
Individual Shut-Off Valves (Less Common): In some cases, showers may have individual shut-off valves located behind an access panel in the wall or in the wall itself. These valves are used to completely isolate the water supply to the shower for maintenance or repairs. These are not usually used to turn the water off after each shower. If you are looking for the shut-off valve, it's usually located in the wall behind the shower or in an access panel.
If the water won't turn off, here are a few things to consider:
-
Check for a Jam: Sometimes debris can get stuck in the valve. Try wiggling the handle gently to see if it dislodges anything.
-
Faulty Cartridge: The shower valve cartridge might be worn out or broken. This is a common cause of leaky showers. You'll need to replace the cartridge. This is a plumbing repair that may require a professional.
-
Water Pressure Issues: In rare cases, fluctuating water pressure can prevent the valve from fully closing.
In most cases, simply turning the shower handle to the "off" position will do the trick! If you have ongoing problems, it's likely time to call a plumber.
