To connect a poly pipe, you typically push the fitting all the way in and then clamp it securely.
Here's a more detailed breakdown:
-
Preparation: Ensure the poly pipe end is clean and free from debris. Cut the pipe squarely for a proper connection.
-
Fitting Selection: Choose the correct type and size of fitting for your poly pipe (e.g., barbed fittings, compression fittings).
-
Insertion: Push the fitting into the poly pipe as far as it will go. This often requires some force.
-
Clamping (if required): Many fittings require a clamp to secure the connection. Place the clamp around the poly pipe, over the fitting, and tighten it securely. Use the appropriate type of clamp for your fitting and application (e.g., hose clamp, crimp clamp).
Example using a barbed fitting and hose clamp:
- You have a section of poly pipe you need to connect to another pipe or component.
- Select a barbed fitting of the appropriate size.
- Push the barbed fitting into the end of the poly pipe. It should be a tight fit.
- Slide a hose clamp over the poly pipe and position it over the barbed section of the fitting.
- Tighten the hose clamp using a screwdriver until it's snug and secure. Avoid overtightening, which could damage the pipe.
Note: The specific steps and fitting types may vary depending on the specific application and the type of fitting being used. Always refer to the manufacturer's instructions for the specific fitting you are using.
