To oil a flooring nailer and keep it running smoothly, you typically add a few drops of oil directly into the tool's air inlet port. This port is where the air hose connects.
Based on the provided reference demonstrating the process for a PFL618 nailer, the method involves:
Simple Steps to Oil Your Flooring Nailer
Maintaining your flooring nailer with regular oiling is crucial for its longevity and performance. Pneumatic tools rely on lubrication to keep internal components moving freely and to prevent rust.
Here's how to oil your nailer following the technique shown in the reference:
- Locate the Air Inlet: Identify the port on your flooring nailer where the air hose connects. This is the point where compressed air enters the tool.
- Turn the Nailer: As shown in the video titled "PFL618 Oil Application," you will need to "turn the nailer on the end" so that the air inlet port is facing upwards, ready to receive the oil.
- Apply the Oil: Carefully dispense a small amount of oil into the air inlet. The reference suggests putting "two or three drops in the end of the nailer." Avoid over-oiling, as this can cause issues like spitting oil during operation.
- Connect Air and Cycle: Connect your air hose to the nailer. Fire the tool a few times into a scrap piece of wood or material. This helps distribute the oil throughout the internal parts of the nailer.
Why Oiling is Important
- Lubrication: The oil lubricates the piston, O-rings, and other moving parts, reducing friction and wear.
- Prevent Rust: Oil helps prevent internal components from rusting, which can happen due to moisture in compressed air.
- Improved Performance: A well-lubricated nailer operates more efficiently, cycles faster, and is less prone to jams.
What Type of Oil to Use
Always use pneumatic tool oil or air tool oil. These oils are specifically formulated for pneumatic tools, are non-detergent, and are designed to work effectively with the materials and pressures involved. Do not use standard motor oil, WD-40, or other lubricants not intended for pneumatic tools, as they can damage the internal seals and components.
Regularly oiling your flooring nailer, ideally before each use or at the start of a workday, is a simple maintenance step that will significantly extend the life of your tool and ensure reliable operation.
