How to Remove Air from a Sand Filter?

To effectively remove air from a sand filter, follow these straightforward steps:

Steps to Purge Air from Your Sand Filter

1. Power Down: Begin by turning off your sand filter pump and unplugging it from the power outlet. This ensures safety and prevents any damage during the process.
2. Set Valve to Neutral: Locate the 6-way valve on your filter and rotate it to the "N" or "Neutral" position. This step is crucial as it allows air to be released without water recirculating through the system.
3. Open the Air Release Valve: Find the air release valve, typically located on the motor housing (pre-filter). Carefully open this valve.
4. Monitor and Close: Observe the valve. Initially, air will be expelled. Once only water is coming out of the valve, close it. This indicates that the trapped air has been successfully purged.

Here's a summary of the steps in a table:

Step	Action
1	Turn off the sand filter pump and unplug.
2	Turn the 6-way valve to the "N" position.
3	Open the air release valve on the motor housing.
4	Close the valve once only water comes out.

By completing these steps, you will successfully remove the air from your sand filter and ensure it functions optimally.