To use a pool float patch, you generally need to clean the area around the puncture, cut the patch to the appropriate size, and then apply the patch firmly. Here's a more detailed breakdown:
Steps for Applying a Pool Float Patch:
- Clean the Area: Use a clean cloth and rubbing alcohol to thoroughly clean the area surrounding the hole or tear on the pool float. This removes dirt, oils, and debris, allowing the patch to adhere properly.
- Cut the Patch: Cut the patch to a size that extends beyond the damaged area by at least half an inch in all directions. Rounding the corners of the patch helps prevent it from peeling up later.
- Apply the Patch: Peel off the backing from the patch (if it's a self-adhesive patch) and carefully center it over the hole. Press firmly, working from the center outwards, to eliminate any air bubbles. If the patch requires glue, apply the glue to the patch according to the manufacturer's instructions before applying.
- Allow to Dry/Cure: Allow the adhesive to dry or cure completely, following the instructions on the patch or adhesive packaging. This may take several hours.
- Test the Repair: After the drying/curing time, carefully inflate the pool float and check for any leaks around the patch. If you find leaks, you may need to apply another patch or use a stronger adhesive.
Important Considerations:
- Patch Type: Different pool floats may require specific types of patches. Read the instructions that come with your patch kit.
- Surface Preparation: Proper cleaning is crucial for a successful patch.
- Pressure: Applying firm, even pressure during application helps the patch adhere correctly.
