Draining a pool with a submersible pump is a straightforward process, involving connecting a hose to the pump, placing it in the pool, and turning it on to remove the water.
Here's a step-by-step guide:
-
Gather Your Equipment: You'll need a submersible pump, a garden hose (long enough to reach from your pool to the drainage area), and an extension cord if needed. Ensure the pump is designed for pool draining and is suitable for the volume of water you're dealing with.
-
Connect the Hose: Attach one end of the garden hose to the pump's outlet. Make sure the connection is secure to prevent leaks. Use a hose clamp if necessary.
-
Position the Hose Outlet: Place the other end of the hose in the area where you want to drain the water. Be mindful of local regulations regarding water disposal. Avoid draining into storm drains, as this can carry chemicals into the environment. Consider draining onto your lawn or into a sewer cleanout (check local regulations first).
-
Submerge the Pump: Carefully lower the submersible pump into the deepest part of the pool. Ensure the pump is fully submerged before turning it on. It's a good idea to place the pump on a flat surface, like a brick or tile, to prevent it from sucking up debris from the bottom of the pool.
-
Plug in the Pump: Plug the pump into a grounded electrical outlet, using an extension cord if necessary. Ensure the extension cord is rated for outdoor use and is in good condition.
-
Start Pumping: Turn on the pump. It should start pumping water out of the pool through the hose.
-
Monitor the Process: Keep an eye on the pump and the water level. As the water level drops, you may need to reposition the pump to ensure it remains submerged and continues to pump efficiently.
-
Turn Off the Pump: Once the pool is drained to the desired level, turn off the pump and unplug it.
-
Disconnect and Store: Disconnect the hose from the pump and store the pump and hose in a dry place.
Important Considerations:
- Safety First: Always disconnect the pump from the power source before handling it in the water. Never enter the pool while the pump is running.
- Check Local Regulations: Before draining your pool, check local regulations regarding water disposal. Some areas may have restrictions on where you can drain pool water.
- Prevent Debris: Consider using a mesh bag or filter around the pump intake to prevent it from clogging with leaves and debris.
- Pump Capacity: Choose a pump with sufficient capacity for your pool size. A higher GPM (gallons per minute) rating will drain the pool faster.
- Priming: Some submersible pumps may need to be primed before use. Consult the pump's instructions for priming procedures.
By following these steps, you can safely and effectively drain your pool using a submersible pump.
