How do you remove a pool booster pump?
Based on the provided reference, one method described for removing a pool booster pump involves cutting the plumbing, gluing a cap, and disconnecting the pump at the timer.
The provided reference details a specific procedure for removing "Flair's booster" pump. This method focuses on disconnecting the pump from the pool's plumbing by cutting and capping the pipe, and disconnecting the electrical connection at the timer.
The Removal Process
According to the reference, the steps involved are straightforward:
- Cut the plumbing connected to the pump.
- Glue a cap onto the cut plumbing.
- Disconnect the pump at the timer.
These steps represent the entire process described for removing the booster pump in the reference.
Key Actions
The core actions highlighted in this specific removal method are:
- Cutting the Plumbing: This step physically separates the pump from the pool's circulation system.
- Gluing a Cap: After cutting, a cap is glued onto the open end of the remaining pipe to seal the plumbing.
- Disconnecting at the Timer: This step involves disconnecting the pump's electrical connection where it is controlled by the timer, effectively shutting off its power supply and control.
Summary of Referenced Method
The reference explicitly states that cutting the plumbing, gluing a cap, and disconnecting at the timer is all that is necessary to remove "Flair's booster." This suggests a method focused on permanent removal by altering the existing plumbing configuration.
| Step | Action Described in Reference |
|---|---|
| 1. Plumbing Disconnect | Cut the plumbing |
| 2. Plumbing Seal | Glue a cap on |
| 3. Electrical Disconnect | Disconnect it at the timer |
