To remove the paper tray from your HP Envy printer, you will need to follow a specific sequence of steps involving sliding the tray and disengaging a retainer mechanism.
Here is the exact process based on the provided instructions:
Begin by sliding the input tray up. Continue sliding the tray until it reaches its stopping point. When the tray stops, press outward on the tray retainer (or retainers, depending on the model) to create enough clearance for the tray to be released. Once the retainer is pressed outward, you can then remove the tray from the printer.
Step-by-Step Guide to Removing the Input Tray
Removing the paper or input tray from your HP Envy printer is a straightforward task when you know the specific mechanism. This process often involves a retainer clip or lever that needs to be released.
Follow these detailed steps:
- Locate the Input Tray: Identify the primary paper input tray on your HP Envy printer. This is typically located at the bottom or front of the printer.
- Slide the Tray: Gently slide the input tray up. Apply smooth, steady pressure as you slide.
- Reach the Stop: Continue sliding the tray upwards until you feel it naturally stop. Do not force it past this point.
- Engage the Retainer: When the tray stops, locate the tray retainer mechanism. This is usually a plastic tab or lever on the side or bottom that holds the tray in place.
- Press Outward: Press outward on the tray retainer. This action disengages the lock or catch that secures the tray within the printer's frame. You might need to press firmly but carefully to avoid breaking the retainer.
- Remove the Tray: With the retainer pressed outward and disengaged, you can now remove the tray from the printer. Carefully pull the tray straight out.
Understanding this process ensures you can safely remove the tray for maintenance, clearing jams (if applicable to tray removal), or other tasks without causing damage to the printer or the tray itself.
Remember to always handle printer components with care. For reinstallation, simply reverse the process, ensuring the retainers click into place to secure the tray.
