To get water out of a Step2 slide, you will need to drill a drainage hole.
How to Drain Water from Your Step2 Slide
Step2 products, including slides, are often hollow and can accumulate water inside. According to Step2's guidelines, the standard method for draining water from their products involves creating a small hole.
Here's the process based on their recommendation:
- Choose the Location: Identify a suitable spot on the bottom of the slide. It's crucial to select a location that is at least 1 inch away from any seam.
- Drill the Hole: Using a 1/4 inch drill bit, carefully drill a hole at the chosen location on the bottom of the product.
- Facilitate Drainage: Once the hole is made, tip the slide or product as necessary to help the accumulated water drain out completely through the newly created hole.
This method allows trapped water to exit the product, preventing issues like weight increase, potential freezing damage in cold climates, or stagnation.
Here's a quick summary of the key requirements:
| Action | Requirement |
|---|---|
| Tool | Drill with a 1/4" bit |
| Location | On the bottom of the product |
| Placement | At least 1" away from any seam |
| Technique | Tip the product to aid draining |
By following these steps, you can effectively drain water from your Step2 slide or other similar Step2 products.
