Cleaning a water tank pump typically involves cleaning the line strainer, which is a key component in preventing debris from entering the pump and causing damage.
Cleaning a Line Strainer
The provided reference, from a video titled Tankworks - How to clean the line strainer on your pump, demonstrates how to clean a line strainer. Here's a breakdown:
Steps to Clean the Line Strainer:
- Locate the strainer: The line strainer is usually found on the pump itself. It's often a small cylindrical housing with a removable cap.
- Turn off the power: Before you start, always disconnect the power to the pump to ensure safety.
- Unscrew the cap: Unscrew the cap of the line strainer housing, typically by hand, to access the filter.
- Remove the filter: Carefully take out the filter from inside the housing.
- Clean the filter: Clean the filter by rinsing it with water to remove any accumulated debris. You may need to use a brush for stubborn particles.
- Reinstall the filter: Put the cleaned filter back into the housing.
- Screw the cap back on: Secure the cap back onto the housing, ensuring it is hand-tight.
- Restore the power: Once everything is back in place, turn the power back on to the pump.
- Check for leaks: Finally, examine the strainer area for any leaks. If you find any, ensure the cap is tightened correctly.
Additional Tips for Water Tank Pump Maintenance:
- Regular Checks: Regularly check and clean the line strainer to prevent blockage and ensure the pump's efficiency.
- Consult Manual: Always check the pump's manual for specific cleaning instructions. There may be variations depending on the model.
- Professional Assistance: For more complex maintenance, seek the assistance of a qualified professional.
By following these steps, you can ensure your water tank pump remains efficient by keeping the line strainer clean.
