To clean an area rug with a machine, use the rug cleaning setting and follow a specific process.
Machine Rug Cleaning Steps
Here's a step-by-step guide on how to clean your area rug with a machine, incorporating instructions from the provided reference:
- Prepare Your Machine: Ensure your machine is filled with the appropriate cleaning solution and ready to go.
- Turn on the Machine: Press the Rug button on your machine to activate the area rug setting. This is crucial for the correct water and solution delivery for delicate area rugs.
- Start Cleaning: Begin cleaning the rug by moving the machine in a forward and backward motion. While doing this:
- Hold the Solution Spray Trigger: Continuously hold the solution spray trigger while moving over the rug. This allows the cleaning solution to be released onto the rug fibers.
- Monitor the Cleaning: Pay close attention to the areas you are cleaning to ensure even coverage.
- Dry the Rug: After cleaning, go over the rug a second time to help it dry.
- Release the Solution Spray Trigger: This time, release the solution spray trigger to avoid over-wetting the rug while going over the same areas again to extract the moisture.
Important Tips
- Avoid Over-Wetting: While holding the spray trigger, ensure you're not over-saturating the rug.
- Multiple Passes: For heavily soiled areas, you might need to do multiple passes.
| Step | Action |
|---|---|
| 1. Prepare Machine | Fill machine with the correct solution. |
| 2. Turn On | Press the "Rug" button to select area rug setting. |
| 3. Start Cleaning | Hold the solution trigger and monitor cleaning area. |
| 4. Help Dry the Rug | Go over the rug again, without holding trigger for spray. |
By following these steps, you can effectively and safely clean your area rug using a machine.
