To make salt blocks, you'll need a few specific ingredients and a mixing process, and here's how it's done based on the provided reference:
Ingredients
Here's what you need to gather:
- Termite Mound Clay: Pound and sift clay from a termite mound.
- Rock Salt: Use a good quality rock salt.
- Bone Powder: This will act as a binder.
- Water: Needed to create a paste.
Mixing Instructions
Follow these steps for proper mixing:
- Prepare the Clay: Start by pounding and sifting the clay from a termite mound to remove any large particles.
- Combine Dry Ingredients: Mix two parts rock salt, four parts bone powder, and one part of the prepared termite clay in a mixing container.
- Add Water: Gradually add water to the dry mixture, stirring continuously until you achieve a thick, workable paste consistency.
- Note: The amount of water needed may vary depending on the moisture content of the clay, so adjust accordingly.
Summary
Here is a quick table summary of the salt block recipe:
| Ingredient | Part |
|---|---|
| Rock Salt | 2 |
| Bone Powder | 4 |
| Termite Mound Clay | 1 |
| Water | As Needed for Paste Consistency |
This process uses a specific set of materials and ratios to achieve a strong, usable salt block. Remember to adjust the water amount to get a good workable paste.
